Specifications
MG-MICA MULTIPURPOSE GRID AND ACCESSORIES 
PN: 05.147.034.01 A 
Page 34 of 44
Meyer Sound Laboratories Inc.
www.meyersound.com
T: +1 510 486.1166
F: +1 510 486.8356
MDTL-MICA DOWNTILT LINK
The MDTL-MICA downtilt link adds a fixed amount of downtilt to ground-stacked MICA loudspeakers. The versatile 
MDTL-MICA links connect to the rear GuideALinks of the bottom MICA and can be used to downtilt MICAs when they 
are ground-stacked on top of the MG-MICA or the 600-HP subwoofer.
CAUTION: The MDTL-MICA downtilt link is only rated for ground-stacking applications, and should not 
be used in any flown configuration.
List of Contents: MDTL-MICA Downtilt Link Kit (40.147.060.01)
Qty Part Number Description
2
40.147.059.01 MDTL-MICA Downtilt Link
2
134.021 3/8" x 1.125" Quick-Release Pin 
(Blue button)
MDTL-MICA with MG-MICA Grid
The MDTL-MICA downtilt link adds 10 degrees of downtilt to ground-stacked MICA loudspeakers with respect to the 
MG-MICA grid. With these additional 10 degrees, the MDTL-MICA provides a downtilt range between 12.5 degrees 
and 18.5 degrees. Please refer to Table 12 on page 35.
The downtilt link connects between the MG-MICA grid and the lowest MICA loudspeaker’s rear GuideALinks. Use the 
3/8" x 1.125" quick-release pins (with Blue release button) included in the kit to connect the MDTL-MICA downtilt links 
to MICA’s rear GuideALinks, and the 3/8" x 1.5" (with Red release button) included with the MG-MICA to connect the 
links to the grid. One downtilt link per side must be used. 
NOTE: Up to six 
(6) MICA loud-
speakers can be easily 
ground-stacked on the 
MG-MICA grid. Because 
of the increased difficulty 
of stacking more than this 
quantity, as well as for 
safety reasons, avoid 
ground-stacking more than 
six MICA loudspeakers.
NOTE: When 
ground-
stacking with the MG-
MICA grid, screw the 
four provided leveling 
feet (part #124.878) 
into the four corners.
CAUTION: To 
further secure 
larger ground-stacked 
arrays, particularly in 
outdoor situations, use 
a tie down or weight 
on the grid and/or a 
safety system on the 
array.










