User guide

Set Multiple Mixer Values with a Fade Time

F0 = Start message

1F = LCS Audio manufacturers ID

7E = Matrix3 Product ID

10 = Mixer Subsystem

3F = Broadcast to all LX-300s

0F = Set Multiple Parameters with Fade time

xx = Category

xx = Number of points to set

For each point:

xx = low 7 bits of parameter Index0

xx = hi 7 bits of parameter Index0

xx = low 7 bits of parameter Index1

xx = hi 7 bits of parameter Index1

xx = low 7 bits of Value

xx = hi 7 bits of Value

xx = low 7 bits of Fade Time

xx = hi 7 bits of Fade Time

End of message:

xx = Checksum

F7 = End message

Note

The maximum number of messages that can be sent is 110.

Requesting Mixer Values

Requesting a Single Mixer Parameter

F0 = Start message

1F = LCS Audio manufacturers ID

7E = Matrix3 Product ID

25 = External Control Subsystem

3F = Broadcast to all LX-300s

41 = Command: Get Mix Parameter Value

06 = length of following data (or 07 if specspace byte is present)

XX = Tag Number