User guide

Controlling the Mixer
Setting Mixer Values 19
Requesting Mixer Values 20
SpecSpace Values 21
Mixer Categories, Indexes, and Values 23
AFL and PFL Examples 24
Output Relay Examples 24
Setting Mixer Values
Set a Single Mixer Value
F0 = Start message
1F = LCS Audio manufacturers ID
7E = Matrix3 Product ID
10 = Mixer Subsystem
3F = Broadcast to all LX-300s
09 = Set Parameter command
xx = Category
xx = low 7 bits of parameter Index0
xx = hi 7 bits of parameter Index0
xx = low 7 bits of parameter Index1
xx = hi 7 bits of parameter Index1
xx = low 7 bits of Value
xx = hi 7 bits of Value
xx = Checksum
F7 = End message
See Mixer Categories, Indexes, and Values (p. 23) for descriptions of parameter values.
Set a Single Mixer Value with Fade and Wait Times
F0 = Start message
1F = LCS Audio manufacturers ID
7E = Matrix3 Product ID
10 = Mixer Subsystem
3F = Broadcast to all LX-300s
0E = Set Parameter with Fade and Wait time
xx = Category
xx = low 7 bits of parameter Index0
xx = hi 7 bits of parameter Index0
xx = low 7 bits of parameter Index1
xx = hi 7 bits of parameter Index1
xx = low 7 bits of Value
xx = hi 7 bits of Value
xx = low 7 bits of Wait Time
xx = hi 7 bits of Wait Time
xx = low 7 bits of Fade Time
xx = hi 7 bits of Fade Time
xx = Checksum
F7 = End message
19