User guide

Show Pending Cue

F0 = Start message

1F = LCS Audio manufacturers ID

7E = Matrix3 Product ID

11 = Cue List Subsystem

3F = Broadcast to all LX-300s

53 = Show next cue command

40 = Checksum

F7 = End message

Recall Cue List Entry

F0 = Start message

1F = LCS Audio manufacturers ID

7E = Matrix3 Product ID

11 = Cue List Subsystem

3F = Broadcast to all LX-300s

1D = Recall Cue List Entry ID

XX = Least significant 7 bits of Cue List ID

XX = Most significant 7 bits of Cue List ID

XX = Least significant 7 bits of Cue List Entry ID

XX = Most significant 7 bits of Cue List Entry ID

xx = Calculated checksum value

F7 = End message

Important

The Cue List Entry IDs are not shown in the CueStation GUI. It may take some trial and error to figure out the correct

Cue Entry ID. (The Cue List Entry ID is not the same thing as the "INDEX" that is shown in the Cue List and Transport

windows.)

In most applications it would be better to recall the cue directly using the Cue ID, or to recall the next entry in a Cue

List by using the Recall Next command.

Stop, Pause, and Resume Controls

Stop All

To stop fades in progress, Wild Tracks™ hard disk playback, and SpaceMap® multichannel surround panning tra-

jectories, the following message template is used.

F0 = Start message

1F = LCS Audio manufacturers ID

7E = Matrix3 Product ID

10 = sxMixer Subsystem

7F = Frame ID

3F = Broadcast to all LX-300s

0D = Stop command

0F = Stop command

Stop, Pause, and Resume Controls