Operating instructions

CHAPTER 6: MOUNTING CAL LOUDSPEAKERS

■ Insert the included quick-release pin into the screw hole

of the bottom loudspeaker bracket (either side). The

quick-release pin holds the loudspeaker in place.

■ Secure the top of the loudspeaker with the included

3/8-16 hex screws, lock washers, and flat washers (both

sides).

■ Secure the bottom of the loudspeaker with the included

3/8-16 hex screws, lock washers, and flat washers (both

sides).

4. Rotate CAL left or right to position its horizontal disper-

sion for the desired coverage.

5. Fully tighten the hex nuts securing the top and bottom

loudspeaker brackets.

6. Attach the endcaps to CAL:

■ Align the top endcap (the one without the drainage slot)

with the top screw holes and secure the endcap with the

included 10-32 panhead screws and washers.

■ Align the bottom endcap (the one with the drainage slot)

with the bottom screw holes and secure the endcap with

the included 10-32 panhead screws and washers.

Quick-

release pin

Lock

washer

Flat

washer

3/8-16

hex screw

3/8-16

hex screw

Lock

washer

Flat

washer

10-32 panhead

screws and

washers

Drainage slot

10-32 panhead

screws and

washers