Operating instructions

DECLARATION OF CONFORMITY ACCORDING TO ISO/IEC GUIDE 22 AND EN 45014

CAL Operating Instructions, PN 05.210.087.01 A3

The contents of this manual are furnished for informational purposes only, are subject to change without notice, and should not be con-

strued as a commitment by Meyer Sound Laboratories Inc. Meyer Sound assumes no responsibility or liability for any errors or inaccura-

cies that may appear in this manual. Except as permitted by applicable copyright law, no part of this publication may be reproduced,

stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, recording or otherwise, without prior writ-

ten permission from Meyer Sound.

CAL, Intelligent AC, RMS, and all alpha-numeric designations for Meyer Sound products and accessories are trademarks of Meyer Sound.

Compass, Meyer Sound, the Meyer Sound wave logo, Thinking Sound, and TruShaping are registered trademarks of Meyer Sound Labo-

ratories Inc. (Reg. U.S. Pat. & Tm. Off.). All third-party trademarks mentioned herein are the property of their respective trademark holders.

Manufacturer’s Name: Meyer Sound Laboratories Inc.

Manufacturer’s Address: 2832 San Pablo Avenue

Berkeley, CA 94702-2204, USA

Declares that the product:

Product Names: CAL 96 Column Array Loudspeaker System

CAL 64 Column Array Loudspeaker System

CAL 32 Column Array Loudspeaker System

Product Options: All

Conforms to the following Product Specifications:

Safety: EN 60065:2002

Supplementary Information: The product herewith complies with the requirements of the Low Voltage

Directive (LVD) 2006/95/EC.

Signature:

Ms. Margie Garza

Director of Quality

Meyer Sound Laboratories Inc.

Berkeley, California 94702 USA

Issued June 28, 2012

European Contact:

Your local Meyer Sound dealer or

Meyer Sound Germany, GmbH.