User's Manual
Table Of Contents
- Information on how to use and the manufacturer
- Security
- Proper use
- Basic safety information
- Avoid material damage and functional faults
- Avoid material damage through use of an incorrect power supply
- Avoid material damage through improper use of batteries
- Avoid material damage due to rain, vapour, heat and air humidity
- Avoid material damage due to moisture
- Avoid material damage through improper carrying
- Avoid material damage through use of one of flash devices built into the camera.
- Avoid material damage through incorrect accessories
- Functional faults due to electromagnetic radiation
- Avoid functional faults due to soiling
- Avoid material damage through improper cleaning
- Design of warning notices
- Design of warnings for material damage
- Description
- Unpack radio-control system and check that all the stated parts are present
- Assemble radio-control system
- Operating the radio-control system
- Operating the receiver
- Operating the transceiver
- Switching the transceiver on and off
- Setting up a remote channel
- Testing the radio-control system
- Setting up remote groups and operating mode
- Setting up synchronisation types
- Manual flash exposure compensation in TTL mode
- Setting up slave flash reflector position on the transceiver
- Setting manual partial light output levels in M-mode
- Setting the flash ratio
- Setting up master and slave mode
- Turning AF beam on and off
- Fixing errors
- Dismantling the radio-control system
- Performing firmware updates
- Caring for and cleaning the radio-control system
- Storing and transporting the radio-control system
- Disposing of the radio-control system
- Warranty conditions
- Contact for service requests
Warranty
conditions
43
Warranty conditions
Federal Republic of Germany
1. The warranty conditions solely apply to purchases made in the Federal
Republic of Germany.
2. In other countries, the warranty regulations of the respective country or
warranty regulations of the seller shall apply.
3. The following conditions are only valid for private use.
4. The warranty period - 24 months - begins upon the conclusion of the
purchase contract or the day on which the device is delivered to the buyer
(end consumer).
5. Warranty claims can only be asserted when accompanied by proof of
purchase date in the form of the original sales receipt issued automatically
by the seller.
6. We ask you to return defective devices together with the purchase receipt
either via the specialist dealer or directly to the company Metz mecatech
GmbH, Central Customer Services, Ohmstraße 55, 90513 Zirndorf, Germany
in a safe and secure manner with a detailed description of the complaint.
Outward and return shipping is performed at the risk of the buyer.
7. The warranty is based on devices which become defective due to a
recognised error in fabrication or the materials used and which are
subsequently repaired or replaced, should repairing the device entail
disproportionate expense. Further liability, particularly for damage which
did not arise on the basis of the device itself, is excluded. This shall not
apply in the case of intentional acts or gross negligence for which the
assumption of liability is mandatory. Warranty services do not extend the
warranty period and replaced or improved parts do not establish a new
warranty period.
8. Improper handling and interventions by the buyer or third parties cause
warranty obligations and all other claims to expire. The warranty
furthermore excludes damage or faults caused by non-compliance with the
instruction manual, mechanical damage, expended batteries, force majeure
or water/lightning etc.. Furthermore, the warranty does not cover wear,
consumption or excessive use. This particularly affects the following parts:
Contacts, USB connection cable.
9. These warranty conditions do not affect the buyer’s warranty claims against
the seller.
Metz mecatech GmbH
Ohmstraße 55
D-90513 Zirndorf
www.metz-mecatech.de