User's Manual
Table Of Contents
- Information on how to use and the manufacturer
- Security
- Proper use
- Basic safety information
- Avoid material damage and functional faults
- Avoid material damage through use of an incorrect power supply
- Avoid material damage through improper use of batteries
- Avoid material damage due to rain, vapour, heat and air humidity
- Avoid material damage due to moisture
- Avoid material damage through improper carrying
- Avoid material damage through use of one of flash devices built into the camera.
- Avoid material damage through incorrect accessories
- Functional faults due to electromagnetic radiation
- Avoid functional faults due to soiling
- Avoid material damage through improper cleaning
- Design of warning notices
- Design of warnings for material damage
- Description
- Unpack radio-control system and check that all the stated parts are present
- Assemble radio-control system
- Operating the radio-control system
- Operating the receiver
- Operating the transceiver
- Switching the transceiver on and off
- Setting up a remote channel
- Testing the radio-control system
- Setting up remote groups and operating mode
- Setting up synchronisation types
- Manual flash exposure compensation in TTL mode
- Setting up slave flash reflector position on the transceiver
- Setting manual partial light output levels in M-mode
- Setting the flash ratio
- Setting up master and slave mode
- Turning AF beam on and off
- Fixing errors
- Dismantling the radio-control system
- Performing firmware updates
- Caring for and cleaning the radio-control system
- Storing and transporting the radio-control system
- Disposing of the radio-control system
- Warranty conditions
- Contact for service requests
Caring for and cleaning the radio
-control system
42
Caring for and cleaning the radio-control system
CAUTION!
Incorrect cleaning can lead to damage to the radio-control system.
Do no use any aggressive chemicals or solvents to clean the
radio-control system.
To care for/clean the radio-control system, proceed as follows:
Cleaning/caring for the radio-control system when needed.
To clean and maintain, only use a dry, soft cleaning cloth (e.g. microfibre
cloth).
Storing and transporting the radio-control
system
Always transport the system in the carrying bag provided.
Store the radio-control system in a location where it will not be exposed to
heat or humidity.
Disposing of the radio-control system
In Europe
Discard the packaging of the radio-control system depending on the material.
Use your local waste disposal facilities for paper, cardboard and lightweight
packaging.
Do not dispose of the radio-control system or expended batteries in domestic
waste. For information on collection points which accept old devices free of
charge, contact your local or city authority.
Outside of Europe
Dispose of the radio-control system in accordance with the regulations
applicable at the location in question.
If in doubt, contact the company Metz mecatech.