User's Manual
Table Of Contents
- Information on how to use and the manufacturer
- Security
- Proper use
- Basic safety information
- Avoid material damage and functional faults
- Avoid material damage through use of an incorrect power supply
- Avoid material damage through improper use of batteries
- Avoid material damage due to rain, vapour, heat and air humidity
- Avoid material damage due to moisture
- Avoid material damage through improper carrying
- Avoid material damage through use of one of flash devices built into the camera.
- Avoid material damage through incorrect accessories
- Functional faults due to electromagnetic radiation
- Avoid functional faults due to soiling
- Avoid material damage through improper cleaning
- Design of warning notices
- Design of warnings for material damage
- Description
- Unpack radio-control system and check that all the stated parts are present
- Assemble radio-control system
- Operating the radio-control system
- Operating the receiver
- Operating the transceiver
- Switching the transceiver on and off
- Setting up a remote channel
- Testing the radio-control system
- Setting up remote groups and operating mode
- Setting up synchronisation types
- Manual flash exposure compensation in TTL mode
- Setting up slave flash reflector position on the transceiver
- Setting manual partial light output levels in M-mode
- Setting the flash ratio
- Setting up master and slave mode
- Turning AF beam on and off
- Fixing errors
- Dismantling the radio-control system
- Performing firmware updates
- Caring for and cleaning the radio-control system
- Storing and transporting the radio-control system
- Disposing of the radio-control system
- Warranty conditions
- Contact for service requests
Information on how to use and the manufacturer
4
Information on how to use and the manufacturer
These instructions will help you safely use the WT-1 radio-control system
(Wireless Trigger 1). The WT-1 radio-control system (Wireless Trigger 1) consists
of a transceiver WT-1T and receiver WT-1R and is referred to as “radio-control
system” for short in the following.
The transceiver WT-1T and receiver WT-1R are also shortened to “transceiver”
and “receiver” within these instructions.
Ensure instructions are kept available
These instructions form part of the radio-control system.
Always keep these instructions with the radio system.
If you sell or otherwise pass on the radio system, please also provide these
instructions.
Design features in the text
Various elements of these instructions feature predefined design features.
These enable the following elements to be easily differentiated:
Normal text
ON/OFF, OK, AF ON/OFF
Operation steps
• Enumeration of the first level
Cross-references
Tips include additional information, such as special radio system
specifications.
Manufacturer contact information
Metz mecatech GmbH
Ohmstraße 55
90513 Zirndorf
Tel.: +49-911-9706-0
Email: info@metz-mecatech.de
Website: www.metz-mecatech.de