User's Manual
Table Of Contents
- Information on how to use and the manufacturer
- Security
- Proper use
- Basic safety information
- Avoid material damage and functional faults
- Avoid material damage through use of an incorrect power supply
- Avoid material damage through improper use of batteries
- Avoid material damage due to rain, vapour, heat and air humidity
- Avoid material damage due to moisture
- Avoid material damage through improper carrying
- Avoid material damage through use of one of flash devices built into the camera.
- Avoid material damage through incorrect accessories
- Functional faults due to electromagnetic radiation
- Avoid functional faults due to soiling
- Avoid material damage through improper cleaning
- Design of warning notices
- Design of warnings for material damage
- Description
- Unpack radio-control system and check that all the stated parts are present
- Assemble radio-control system
- Operating the radio-control system
- Operating the receiver
- Operating the transceiver
- Switching the transceiver on and off
- Setting up a remote channel
- Testing the radio-control system
- Setting up remote groups and operating mode
- Setting up synchronisation types
- Manual flash exposure compensation in TTL mode
- Setting up slave flash reflector position on the transceiver
- Setting manual partial light output levels in M-mode
- Setting the flash ratio
- Setting up master and slave mode
- Turning AF beam on and off
- Fixing errors
- Dismantling the radio-control system
- Performing firmware updates
- Caring for and cleaning the radio-control system
- Storing and transporting the radio-control system
- Disposing of the radio-control system
- Warranty conditions
- Contact for service requests
Contents
Information on how to use and the manufacturer ....................................... 4
Ensure instructions are kept available ............................................................... 4
Design features in the text ................................................................................. 4
Manufacturer contact information ...................................................................... 4
Security ................................................................................................... 5
Proper use ........................................................................................................ 5
Basic safety information .................................................................................... 5
Avoid material damage and functional faults ...................................................... 6
Design of warning notices ................................................................................. 8
Design of warnings for material damage............................................................. 8
Description ............................................................................................. 9
Included in delivery ........................................................................................... 9
Purpose and functions ..................................................................................... 10
Transceiver overview ........................................................................................ 11
Receiver overview ............................................................................................ 12
Transceiver screen overview ............................................................................. 13
LED status display for transceiver and receiver .................................................. 13
Compatibility list ............................................................................................. 14
Technical data ................................................................................................. 15
Unpack radio-control system and check that all the stated parts are
present .................................................................................................. 15
Assemble radio-control system ................................................................ 16
Place power sources into battery compartment ................................................. 16
Mount the transceiver onto the camera ............................................................. 17
Assemble the receiver, flash device and stand. ................................................. 18
Assemble the receiver, flash device and tripod .................................................. 19
Mounting the receiver onto Studio flash equipment .......................................... 20
Operating the radio-control system .......................................................... 21
Operating the receiver ...................................................................................... 21
Operating the transceiver ................................................................................ 23
Fixing errors ........................................................................................... 36
Dismantling the radio-control system ....................................................... 38
Dismantling a transceiver from a camera .......................................................... 38
Dismantling the receiver, flash device and stand .............................................. 39
Dismantling the receiver, flash device and tripod ............................................. 40
Dismantling the receiver from Studio flash equipment ....................................... 41