User's Manual
Table Of Contents
- Information on how to use and the manufacturer
- Security
- Proper use
- Basic safety information
- Avoid material damage and functional faults
- Avoid material damage through use of an incorrect power supply
- Avoid material damage through improper use of batteries
- Avoid material damage due to rain, vapour, heat and air humidity
- Avoid material damage due to moisture
- Avoid material damage through improper carrying
- Avoid material damage through use of one of flash devices built into the camera.
- Avoid material damage through incorrect accessories
- Functional faults due to electromagnetic radiation
- Avoid functional faults due to soiling
- Avoid material damage through improper cleaning
- Design of warning notices
- Design of warnings for material damage
- Description
- Unpack radio-control system and check that all the stated parts are present
- Assemble radio-control system
- Operating the radio-control system
- Operating the receiver
- Operating the transceiver
- Switching the transceiver on and off
- Setting up a remote channel
- Testing the radio-control system
- Setting up remote groups and operating mode
- Setting up synchronisation types
- Manual flash exposure compensation in TTL mode
- Setting up slave flash reflector position on the transceiver
- Setting manual partial light output levels in M-mode
- Setting the flash ratio
- Setting up master and slave mode
- Turning AF beam on and off
- Fixing errors
- Dismantling the radio-control system
- Performing firmware updates
- Caring for and cleaning the radio-control system
- Storing and transporting the radio-control system
- Disposing of the radio-control system
- Warranty conditions
- Contact for service requests
Unpack radio-control system and check that all the stated part
s are
present
15
Technical data
Radio-control system
Remote groups Max. 3 (A, B, C)
Channels, transceiver 15 remote channels, 1 Auto channel
Channels, receiver 3 remote channels, 1 Auto channel
Transmitter frequency: 2.4 GHz
Power supply 2 x AA (Mignon):
1.5 V alkaline-manganese dry batteries
or
1.2 V nickel–metal hydride batteries
Synchronisation socket Standard (PC socket)
Transmission range up to max. 300 m
high-speed synchronisation up to 1/8000 sec. possible
Dimensions (W x H x D), transceiver 63 x 52 x 95 mm
Dimensions (W x H x D), receiver 55 x 45 x 90 mm
Weight, transceiver 120 g
Weight, receiver 70 g
Storage conditions Dry and protected against weather
Unpack radio-control system and check that all
the stated parts are present
Remove the radio-control system from the packaging.
Check the delivery to ensure it is correct and contains all the parts stated, see
section:
‘Included in delivery’
starting on page 9.
Please contact us in the event of deviations.