User's Manual
Table Of Contents
- Information on how to use and the manufacturer
- Security
- Proper use
- Basic safety information
- Avoid material damage and functional faults
- Avoid material damage through use of an incorrect power supply
- Avoid material damage through improper use of batteries
- Avoid material damage due to rain, vapour, heat and air humidity
- Avoid material damage due to moisture
- Avoid material damage through improper carrying
- Avoid material damage through use of one of flash devices built into the camera.
- Avoid material damage through incorrect accessories
- Functional faults due to electromagnetic radiation
- Avoid functional faults due to soiling
- Avoid material damage through improper cleaning
- Design of warning notices
- Design of warnings for material damage
- Description
- Unpack radio-control system and check that all the stated parts are present
- Assemble radio-control system
- Operating the radio-control system
- Operating the receiver
- Operating the transceiver
- Switching the transceiver on and off
- Setting up a remote channel
- Testing the radio-control system
- Setting up remote groups and operating mode
- Setting up synchronisation types
- Manual flash exposure compensation in TTL mode
- Setting up slave flash reflector position on the transceiver
- Setting manual partial light output levels in M-mode
- Setting the flash ratio
- Setting up master and slave mode
- Turning AF beam on and off
- Fixing errors
- Dismantling the radio-control system
- Performing firmware updates
- Caring for and cleaning the radio-control system
- Storing and transporting the radio-control system
- Disposing of the radio-control system
- Warranty conditions
- Contact for service requests
Description
13
Transceiver screen overview
No.
Name
1
Displays the function performed by the corresponding function button
2
Displays screen for remote groups A, B, C
3
Displays the currently selected flash mode (TTL, M, OFF) and the setting
parameters
4
Displays the setting parameters for the reflector position or automatic reflector
control
5
Displays synchronisation modes:
Normal synchronisation
High-speed synchronisation HSS
6
Displays battery charge level
7
Displays channel number
8
Displays control modes MASTER, SLAVE, AF ON/OFF
9
Displays whether the camera is connected
10
Displays the function performed by the corresponding function button
11
Displays the function performed by the corresponding function button
LED status display for transceiver and receiver
Flashes blue when the camera is exchanging data with the transceiver or
receiver.
Flashes red for a short time once the trigger signal is received (SYN).
Flashes red twice at second intervals once the inserted batteries are
empty/expended.