User Manual

164
k
10.3.2 Pre-flash suppression or synchronisation
settings
• Press the  button and the menu
will appear.
• Use the buttons  to select .
• Press the
°  button and open the menu.
• Use the  buttons to select the desired syn-
chronisation mode.
Synchronisation without pre-flash
Synchronisation with pre-flash
• Press the
°  button and confirm the selected
setting.
The mode of operation is adopted.
If the synchronisation set here does not work pro-
perly, then proceed as described in 10.3.4.
OPT.
SYNC
10.3.3 Servo mode partial light output
settings
• Use the  buttons to set the desired partial
light output (P).
The partial light output is adopted.
Once the slave flash units have achieved flash-rea-
diness, the AF measurement flash flashes.
Slave groups and remote channels cannot be set in
SERVO mode.
The camera flash unit may not work in the remote
mode.
P 1/1
SERVO
+
OPT.
SYNC
ZOOM
SYNC
LEARN
P 1/1
SERVO