User Manual

159
k
10.1.5 Lighting conditions for flash groups A : B
settings on the master flash unit
• When setting a light ratio for remote flash group
A : B , press the  button repeatedly to set a
light ratio (e.g. 1 : 4) for the remote flash groups.
The selected setting is adopted.
10.1.6 Exposure correction (EV) for flash group C
settings on the master flash unit
Set the lighting conditions to as described in
10.1.4.
When setting an exposure compensation value (EV)
for remote flash group C :
• Press the  button and the menu
will appear.
• Use the buttons  to select .
• Press the
°  button and open the menu.
• Press the  buttons repeatedly and set an
exposure value (EV).
• Press the
°  button and confirm the selected
setting.
The setting is adopted immediately.
Slave flash group C is usually required to illuminate
the background in order to prevent shadows from
forming.
A:BIC
OPT.
EV (C)
A 1
B 4
MASTER
ETTL
C: +1 1/3
A 1
B 4
MASTER
ETTL
OPT.
A:B
EV(C)
RATIO
EV(C)
EV
+1 1/3