User Manual

157
k
10.1.1 Remote master mode settings
• Switch on the flash unit with the

button.
The start screen appears.
• Press the  button and the drop-down
menu will appear.
• Use the  buttons to select the ope-
rating mode.
• Press the
°  button and confirm the selected
operating mode.
Remote master mode is set.
The master itself has no influence on exposure (M
OFF) and no lighting conditions (RATIO OFF) are set.
If the master is to contribute to exposure, then set
the mode or on the master (see
10.1.2).
METTL
MASTER
10.1.2 Setting the flash mode on the master flash
unit
• Press the  button and the menu
will appear.
• Use the buttons  to select .
• Press the
°  button and open the menu.
• Use the  buttons to choose either the
or the operating mode.
• Press the
°  button and confirm the selected
operating mode.
The set mode of operation is adopted immediately.
METTL
OPT.
MODE
OPT.
RATIO
MODE
CHANNEL
MODE
OFF
ETTL
ETTL HSS
EV
RATIO
OFF
MASTER
ETTL
MODE
LED
MASTER
SLAVE
EV
RATIO
OFF
MASTER
ETTL
M
OFF