User Manual

4
Introduction
Thank you for choosing a Metz mecatech product.
We are delighted to welcome you as a customer.
You will of course be impatient to start using the flash unit.
However, it is worthwhile reading the operating instructions and learning how to use the unit
correctly.
Proper Use
This flash unit is intended solely for taking pictures of motifs in the photo-graphic field. It may
be operated only with the accessories described in this instruction manual or the accessories
approved by Metz mecatech.
The flash unit may not be used for any purpose other than that described above.
Declaration
Tip, note
Attention - Extremely important safety information!
The M360 flash unit is built in five different versions and accordingly suitable for:

Digital Canon cameras (EOS and PowerShot) with E-TTL-II flash metering.

Digital Nikon cameras with i-TTL flash control.

Digital Olympus and Panasonic cameras with FourThirds TTL respectively Micro FourThirds
TTL flash control, as well as the compatible digital cameras from Leica.

Digital Sony cameras with preflash TTL flash control.

Digital FUJIFILM cameras with TTL flash control.

The flash unit is not suitable for use with other brands of cameras!
A subsequent system change (e.g. Canon to Nikon) is not possible, even with an
additional adapter.