User Manual

Metz mecablitz Firmware-Update
Metz mecatech GmbH / Firmware-Update - 2 - 18.02.2019
Removal o
If you want to re-program other flash units of the same type, you can leave the "Firmware Update" open. In
this case, remove the first flash unit from the USB cable and connect another one. After waiting for
approximately 5 seconds, you can start the update procedure by clicking "Start".
Metz mecatech GmbH
Ohmstrasse 55
90523 Zirndorf
Germany
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]