User Manual

89
k
The rechargeable batteries/batteries are
empty or flat when the flash delay exceeds
60 seconds (interval between triggering a
full output flash, e.g. in M, and when the
flash readiness indicator is relit).
• Switch off the flash unit by pressing
the

button until all LED displays
are off.
• Remove the flash device from the came-
ra and slide the battery cover

downwards.
• Insert the batteries and slide the battery
cover

back into place.
Please ensure the batteries/rechargeable
batteries are inserted correctly by chek-
king against the symbols in the battery
compartment. Incorrect insertion can ter-
minally damage the unit. Risk of explosi-
on in event of improper use of batteries.
Always replace all batteries with the
same high-quality brand batteries of the
same capacity. Used batteries and
rechargeable batteries should not be dis-
posed of with domestic waste. Do your
bit for the environment and dispose of
used batteries/rechargeable batteries at
designated collections points.
3.3 Switching the flash unit
on and off
• Switch on the flash unit by pressing the
button

The unit will revert to the
last operating mode and the LED display
will light up accordingly.
The button flashes red in standby
mode. Switch off the flash unit by pressing
the button

until all LED displays
are off.
In the event that the flash unit will not
be required for a longer period of
time, we recommend switching the unit
off by pressing the

button and
removing the power supply (batteries,
rechargeable batteries).
3.4 Automatic unit
shut-off / Auto OFF
The flash unit is configured so that
10 minutes after -
• switching on,
• triggering the flash,
• lightly depressing the camera shutter
release,
+
M
TTL
SL
M
TTL
SL