User's Manual

2. Preparing the Flashgun for Use

Fig. 1a: Mounting the components Fig.1b: Inserting the camera bracket

2.1 Attaching the flashgun to a camera

The macablitz must always be connected to the X contact on the camera or the synchronizati-

on selector must be set to X.

Always switch off the camera and the flashgun before mounting or removing the

flashgun.

Mounting the flashgun:

• Fasten the camera bracket with the bracket screw to the camera’s tripod bush. For medium-

and large-format cameras we recommend the use of the 202/4 bracket (optional accessory).

• Insert the camera bracket into the rapid-action catch of the holder block until it is audibly

engaged (fig. 1b).

• Secure the camera bracket with the locking screw.

• Connect the synch cable to the flashgun and camera.

☞

holder block

rapid-action catch