Safety data sheet

MSDS-No.: 351728
V001.5
Metylan Spezial
Page 3 of 7
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove dry, forms a slippery coating with water.
Dispose of contaminated material as waste according to Section 13.
Remove accumulated dust with explosion-proof vacuum cleaner.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Hygiene measures:
7.2. Conditions for safe storage, including any incompatibilities
Store in sealed original container protected against moisture.
Store in a cool, dry place.
Avoid strictly temperatures below 0 °C and above + 50 °C.
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
7.3. Specific end use(s)
Wallcovering adhesive, powder
SECTION 8: Exposure controls/personal protection
8.1. Control parameters
Occupational Exposure Limits
Germany
Ingredient [Regulated substance]
ppm
mg/m
3
Value type
Short term exposure limit
category / Remarks
Regulatory list
DUSTS, NON-SPECIFIC, RESPIRABLE
FRACTION
Short Term Exposure
Classification:
Category II: substances with a
resorptive effect.
TRGS 900
DUSTS, NON-SPECIFIC, RESPIRABLE
FRACTION
10
Exposure limit(s):
2
TRGS 900
DUSTS, NON-SPECIFIC, RESPIRABLE
FRACTION
1,25
Exposure limit(s):
TRGS 900
Biological Exposure Indices:
8.2. Exposure controls:
Respiratory protection:
In case of dust formation, we recommend wearing of appropriate respiratory protection equipment with particle filter P.
This recommendation should be matched to local conditions.
Hand protection:
Recommended are gloves made from Nitril rubber ( Material thickness >0,1 mm, Perforation time < 30s).Gloves should be
replaced after each short time contact or contamination. Available at laboratory specialized trade or at pharmacies / chemist's
shops.