Certifications 2

SDS No.: 441472 V001.0
Metylan Wand & Decke Acryl - all colours
Page 3 of 10
5.1. Extinguishing media
Suitable extinguishing media:
carbon dioxide, foam, powder, water spray jet, fine water spray
Extinguishing media which must not be used for safety reasons:
High pressure waterjet
5.2. Special hazards arising from the substance or mixture
In the event of a fire, carbon monoxide (CO) and carbon dioxide (CO2) can be released.
5.3. Advice for firefighters
Wear protective equipment.
Wear self-contained breathing apparatus.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
Ensure adequate ventilation.
Avoid contact with skin and eyes.
Wear protective equipment.
Danger of slipping on spilled product.
6.2. Environmental precautions
Do not empty into drains / surface water / ground water.
6.3. Methods and material for containment and cleaning up
Remove mechanically.
Dispose of contaminated material as waste according to Section 13.
6.4. Reference to other sections
See advice in section 8
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Avoid skin and eye contact.
Ensure that workrooms are adequately ventilated.
Hygiene measures:
Do not eat, drink or smoke while working.
Wash hands before work breaks and after finishing work.
7.2. Conditions for safe storage, including any incompatibilities
Store frost-free.
Store in a cool place in closed original container.
Storage at 5 to 25°C is recommended.
Do not store together with food or other consumables (coffee, tea, tobacco, etc.).
7.3. Specific end use(s)
Joint sealant, acrylate