Specifications

115
SG2 – pH
pH meter (IP67) for routine use
• Clear display of measured values and settings
• Continuous indication of electrode and battery status
• Automatic endpoint and buffer recognition as well as
temperature compensation
• Data memory for 30 GLP data points
• 3-point calibration with predefined or user-defined buffers
SevenGo™ SevenGo pro™
SG2 Measuring range Resolution Accuracy
pH 0.00…14.00 0.01 ±0.01
mV –1999…1999 1 ±1
Temperature –5.0…105°C 0.1°C ±0.5°C
Sensor inputs BNC (>10
12
Ohm); NTC 30 K (both IP67)
Kit Description and sensor Order No.
SG2-B Meter only 51302521
SG2-ELK Electrode kit with InLab
®
413 SG (IP67) 51302522
SG2-FK Field kit with InLab
®
413 SG (IP67), field carry case 51302523
SG2-ASK Assistant kit with InLab
®
413 SG (IP67), case and ErGo™ 51302525
SG3 – conductivity
Conductivity meter for everyday work
• Automatic endpoint recognition and temperature compensation
• Predefined standards 84 µS/cm, 1413 µS/cm or 12.88mS/cm
• Data memory for 30 GLP data points
• Clear display of measured value and settings
• Complete range of electrodes
SG3 Measuring range Resolution Accuracy
Conductivity 0.10µS/cm… 0.10…1 ±0.5%
500 mS/cm
Temperature 5.0…105°C 0.1°C ±0.2°C
TDS 0.01mg/L…300 g/L 0.01…1 ±0.5%
Resistivity 0.00…100.00 MΩcm
Salinity 0.00…80.00 ppt
Sensor inputs LTW 7 pin (IP67)
Kit Description and sensor Order No.
SG3-ELK Electrode kit with InLab
®
737 (IP67) 51302931
SG3-FK2 Field kit with InLab
®
737 (IP67, 1.8 m cable, field carry case 51302932
SG3-FK10 Field kit with InLab
®
737/10 m (IP67), 10 m cable, field carry case 51302933
SG3-ASK Assistant kit with InLab
®
737 (IP67), case and ErGo™ 51302934
SG6 – dissolved oxygen
Professional oxygen instrument (IP67)
• Manual or automatic air pressure compensation
with built-in barometer
• High-performance O
2
sensor
• Comprehensive range of accessories
• Data memory for 200 GLP data points
• Backlit display (applies to all SevenGo pro™ models)
SG6 Measuring range Resolution Accuracy
Saturation 0.0…600% 0.1…1 ±0.5%
Temperature (°C/°F) 0.0…60°C 0.1°C ±0.1°C
mg/L, ppm 0.00…99.00 0.01 ±0.5%, max. 0.03
Pressure 500…1100 mbar 1 ±2
Sensor inputs BNC (>10
12
Ohm); NTC 22 K (both IP67)
Kit Description and sensor Order No.
SG6-ELK Electrode kit with InLab
®
605 (IP67) 51302561
SG6-FK2 Field kit with InLab
®
605 (IP67), 1.8 m cable, field carry case 51302562
SG6-FK10 Field kit with InLab
®
605 (IP67), 10 m cable, field carry case 51302563
SG6-ASK Assistant kit with InLab
®
605 (IP67), case and ErGo™ 51302564
SG7 Measuring range Resolution Accuracy
Conductivity 0.01 µS/cm… 0.01 ±0.5%
1000 mS/cm
Temperature (°C/°F) –5.0…105°C 0.1°C ±0.5°C
TDS 0.01mg/L…600 g/L 0.01 ±0.5%
Resistivity 0.00…100.00 MΩcm
Salinity 0.00…80.00 ppt
Sensor inputs LTW 7 pin (IP67)
Kit Description and sensor Order No.
SG7-ELK Electrode kit with InLab
®
737 (IP67) 51302571
SG7-FK2 Field kit with InLab
®
737 (IP67), 1.8 m cable, field carry case 51302572
SG7-FK10 Field kit with InLab
®
737/10 m (IP67), 10 m cable, field carry case 51302573
SG7-ASK Assistant kit with InLab
®
737 (IP67), case and ErGo™ 51302574
SG8 Measuring range Resolution Accuracy
pH –2.000…19.999 0.001 ±0.002
mV (rel. mV) –1999…1999 0.1 ±0.1
Temperature (°C/°F) –5.0…130.0 ATC 0.1°C ±0.2°C
30.0…130.0 MTC
Sensor inputs BNC (>10
12
Ohm); NTC 30 KΩ (each IP67)
Kit Description and sensor Order No.
SG8-B Meter only 51202581
SG8-ELK Electrode kit with InLab
®
413 SG (IP67), field carry case 51202582
SG2-FK Field kit with InLab
®
413 SG (IP67), field carry case 51202583
SG2-ASK Assistant kit with InLab
®
413 SG (IP67), case and ErGo™ 51202584
SG7-USP/EP Electrode kit with InLab
®
740 51302575
Outputs (only SG6/7/8) IR interface to printer or PC via RS232 or USB
Power requirements 4 AA batteries 1.5 V or NiMH accumulators 1.3 V
Size/weight,
Ambient conditions –5°C…40°C, 5%…80% rel. humidity (non-cond.)
Package size/weight 220x90x45 mm/325g (without batteries)
SG7 – conductivity
Professional conductivity meter (IP67)
• Calibration also with user-definable standard or cell constant
• Linear and non-linear temperature compensation
• Measurement of purified water according to USP
• Data memory for 200 GLP data points
• Comprehensive GLP functions with sensor and sample identification
SG8 – pH/Ion
pH/Ion meter (IP67) for highest demands
• Simple ion concentration determination
• Time interval measurement with automatic data logging
• Data memory for 200 GLP data points
• Segmented or linear calibration as desired
• 5-point calibration with choice of 6 predefined and one user-defined
buffer set
for all SevenGo™ and SevenGo pro™ models:
www.mt.com/pHlab
For more information