User`s guide

Configuration Options
SERVER IP
This may be displayed, but is not used in the standalone mode.
SERVER NAME
This may be displayed, but is not used in the standalone mode.
BACKUP IP
If the database located at SERVER IP is un-available, the client
will attempt to locate the record at the Backup IP location. The IP
address is entered one octet at a time.
BACKUP NAME
This is the name of the location entered as the Backup IP.
SUBNET MASK
The mask that is used to identify the local network when
accessing an IP address on the Ethernet network. If the “Network”
is set to “Automatic” this field cannot be changed. If the “Network”
is set to “Manual” thee field may be changed. The mask is entered
one octet at a time. The default value is 255.255.255.000.
ROUTER
The router’s (default gateway) IP address. The router is used
when accessing devices outside of the local network. If the
“Network” is set to “Automatic” this field cannot be changed. If the
“Network” is set to “Manual” this field may be changed. The IP
address is entered one octet at a time. The default value is
255.255.255.000.
DHCP SERVER
Display only. This is the current IP address of the local network’s
DHCP server. This field only displays when the “Network” is set to
“Automatic” and cannot be changed.
DNS SERVER
Display only. This is the current IP address of the local network’s
DNS server. This field only displays when the “Network” is set to
“Automatic” and cannot be changed.
MANUAL TFTP
SERVER
The TFTP Server (Trivial File Transfer Protocol) is the location of
the network boot files for the scale that can include application
software and configuration data.
MANUAL TFTP
PORT
The default port is 69. This setting can be changed by the system
administrator if needed.
MANUAL
BOOTFILE
This is the file name of the application or configuration file that
will be downloaded to the scales.
WARM UP
DELAY
0-250 second delay used to allow wireless radio to initialize prior
to scale network initialization.
STANDALONE
OPERATION
YES/NO : Standalone mode Enable/Disable
CLIENT PORT
FIXED/VARIABLE : Scale network TCP/IP Port Configuration
UC-ST User’s Guide
3-9