User`s guide

Configuration Options
NETWORK SETUP
If the network is local, any number can be selected for the IP Address. An IP Address consists of a
group of four numbers from 0 to 255, separated by periods, for example: 207.142.140.101.
Do not duplicate numbers on the network. To enter the numbers, key in the numbers starting with
the MSD (left Most Significant Digit) number. The periods are not entered in this procedure. Enter
numbers lower than 100 with preceding zeros (Example: 10 is entered as 010). To exit without
saving, touch CLEAR. The scale will ping the network for the IP entered. If a duplicate IP is found on
the network, the message “DUPLICATE IP ADDR” will display. You must then change the IP address
to a unique address on the network before the client can access the master database. The UC-ST will
automatically reset on exit after changing the Network Configuration.
UC-ST User’s Guide
3-7