User`s guide

Configuration Options
CHANGE TIME AND DATE
From the Unit Setup screen, touch CHANGE TIME/DATE to bring up the Time and Date screen. To
make changes, touch the appropriate menu option window and follow the instructions indicated
below.
Month Numeric month 1-12.
Day Numeric day 1-31.
Year Last two digits of the current year 00-99.
Date Format Date format (MM/DD/YY, DD/MM/YY, YY/MM/DD, or YY/Mon/DD).
Date Separator Select /, -, or .
Hour Current hour (1-12) through the numeric keyboard.
Minute Current minute (00 - 59) through the numeric keyboard.
PM/AM Select AM or PM by touching the appropriate window.
Time Format Select between12 or 24 hour formats.
NTP Server Enter NTP Server IP
GMT Offset ± Hour offset from GMT
DST Offset Number of minutes offest for the DST
Send Time &
Date To Master
(Touch DOWN to display)
Sends the time and date to a SmartTouch
®
master or STEM.
Sync From
Master
If set to YES, the time will be obtained from the master when the UC-
ST is powered up. Setting to NO will disable this function.
Use 2007 DST
Rule:
YES/NO
3-6 UC-ST User’s Guide