User`s guide

Configuration Options
SETUP MARQUEE
From the Unit Setup screen, touch SETUP MARQUEE to display the Marquee Setup screen. The
messages shown on the Marquee list will scroll on the customer display when the marquee is
active. Any changes made at the unit will not affect the marquees stored in the master/server
database. The marquee starts automatically if there is no activity on the unit after approximately 10
seconds. When the Touchscreen is touched, or if weight is added to the platter, the marquee will be
suspended.
Line
Spacing
Retrieve To retrieve a marquee from the master/server database, first touch
RETRIEVE, and then touch any of the 10 boxes to the left. Touch the
desired action code to select it. If no marquees (Type 3 Action codes)
were located at the master/server, a blank list is displayed.
Edit To edit or create a message, touch the EDIT key and marquee box
you wish to edit.
Delete To delete a message, touch the DELETE key followed by the marquee
message you wish to delete.
Swap To swap the position of a marquee with another, touch SWAP, touch
the marquee to move, then touch the new location.
0-9 To adjust the marquee scrolling speed, change the number in the
FAST/SLOW column by touching the desired speed 0-9.
Start/Stop Starts or stops the marquee for testing purposes.
Line Spacing Change the number of blank spaces between the messages.
UC-ST User’s Guide
3-5