User`s guide

Configuration Options
Touch EDIT,
then the preset
key to add or
edit a preset.
Touch the
department box
to select a new
department.
To change the department that you are selecting PLUs from, touch the DEPARTMENT box (upper
left corner). A list of the departments with descriptions will display. Page through the list to find the
desired department and touch to select it.
To delete an existing preset key, touch DELETE (at the top of the screen) followed by the preset key
you wish to delete. Complete or cancel the deletion as prompted.
To swap the key locations of two preset keys on the preset page, touch SWAP (at the top of the
screen), then touch the first key you want to swap followed by the second key you want to swap.
To add a new preset key or edit an existing preset key, touch EDIT followed by the preset key you
wish to program. The numeric keyboard will display. Type in the PLU number or touch LOOK-UP to
generate a list of PLU numbers from the current department. Page through the list of PLUs to locate
the item and touch to select it.
The alphanumeric keyboard will display, and the preset key description for the item will show in the
upper left hand corner of the display. The second line of text in the left-hand corner is the description
editor. On new preset keys, the preset key description will default to the PLU description.
Use the keyboard to edit the preset key description. The BACKSPACE key erases one character at a
time, and SHIFT BACKSPACE erases the complete line. Up to three lines of 12 characters per line are
allowed. Touch the ENTER key when you are finished.
UC-ST User’s Guide
3-3