User`s guide

Operation
STANDALONE MODE DB EDITOR
Your scale may be set up as a Standalone Scale that has an internal database of records. If you are
in Standalone Mode, when you press the Setup button on the home screen, a “DB EDITOR” button
will be shown as a selection.
Using the DB Editor in the standalone mode, you can add PLU’s, change prices, tare, Shelf Life, and
Use-By dates. To remove records, an external host program must be used.
The DB Editor may be protected by a password. To access the DB Editor, press SETUP then press
DB EDITOR (shown below). If a password has been programmed, enter the password.
The DB Editor screen is shown below.
UC-ST User’s Guide
2-23