User`s guide

Operation
Main Numeric Entry Screen
Indicates scale is Zero
Gross indicates no
tare is taken.
Net indicates wei
g
ht
is net
(
tare taken
)
.
Accesses Unit
Setup Mode or
Master Editor.
Current Department
Name and Number.
Time and Date
Network IP
address
Deletes
accumulator
values from
totals for a
previous
transaction.
Lists up to 150
last used PLUs
for the current
department.
Then press the
PLU to select the
transaction.
Selects a Preset
Page for displa
y
Numeric Entr
y
keys 0-9.
ENTER is used to
Enter a PLU and
advance to the PLU
Edit Screen. When
no PLU is entered, it
will feed a blank
label.
CLEAR is used to:
• Erase an
incorrect entry.
• On some
menus, to
indicate you are
finished.
• Return to the
previous screen.
ENTER/PRINT is used to call a PLU and
automatically print a label. When no PLU
number is entered, it will feed a blank label.
If BATCH QUEUE is enabled, the
LIST QUEUE will show the current
queue list. PRINT QUEUE will print
the batch.
Press far top corner
to access Hel
p
Will displa
y
“Of
f
-Line” to indicate a
communication problem.
Touch to zero the scale.
Switches to
Preset Mode
If memory is active, the SUBTOTAL
AND PRINT MEM keys will be
active. Press SUBTOTAL to display
totals. Press PRINT MEM to print a
receipt label and clear the memory.
ENTER
/
PRINT
ENTER
/
MEM
If Memory is active, the ENTER/PRINT key will
split into two keys. The new key adds a
transaction to memory.
2-4 UC-ST User’s Guide