User`s guide

Operation
QUICK START
The operator display and keyboard is a touchscreen. You simply press the keys
displayed on the screen. But, please only use your fingertip to press on the keys.
Do not use any sharp objects on the touchscreen. You may cause permanent
damage to the touchscreen.
The scale can be operated in Numeric or Preset modes. The following sections will
explain how to call up a PLU number and print a label.
ENTER and ENTER/PRINT keys
Below is the Main numeric screen keyboard has a standard ENTER key and an ENTER/PRINT key.
ENTER key
ENTER/PRINT key
When you key in a PLU number and press the ENTER key, the scale will next display the PLU Edit
screen. On this screen, you can select different options, or just print the label.
When you use the ENTER/PRINT key, a small window displays while the label prints. No overrides
or options are available when using this printing mode. If speed is the most important, the
ENTER/PRINT key will print the label the quickest.
UC-ST User’s Guide
2-3