User`s guide

This chapter covers
• Power Switch
• Scale Operation
• DB Editor Operation
CHAPTER 2
O
PERATION
This chapter will explain the power switch, how to use the touchscreen, call up PLU
(Price Look Up) numbers, and how to print a label.
POWER SWITCH
The power switch and power cord jack are located under the touchscreen on the left front of the
scale. Press the (-) on the switch to turn the scale power to ON. To turn the scale power off, always
exit any editing screens before pressing the (o) on the switch to turn power OFF.
Always turn to power switch to off before cleaning the scale.
Power
Switch
Power Cord
Jack
NETWORK CONNECTION
The UC-ST can connect to your Ethernet network using a cable or using a wireless radio. If you use
a wired network connection and experience connection problems, make sure your Ethernet cable is
connected and seated securely in the jack, located under the touchscreen at the front of the scale. If
you are connected using a wireless radio, you will see a cover protruding from the left side of the
scale, indicating a wireless radio is installed.
Cover for Wireless
Radio Ethernet
network connection.
RJ45
Ethernet Jack for
wired network
connections.
UC-ST User’s Guide 2-1