User`s guide

Loading Labels
1-2 UC-ST User Guide
Install the label
roll on the
supply spool
and remove
about 6 inches
of labels from
the liner. Slide
the labels
under the
guides and
printhead as
shown in the
illustration.
Pull the liner
back and route
it under the
bottom guide.
Gently pull out
on the green
knob on the
liner takeup
and then slide
the liner into
slot in the
roller. Note:
The Green
Knob does not
come all the
way out.
Note: Do not use
excessive force to
pull out on the
green knob. The
knob does not
come out all the
way. Using
excessive force to
pull on the knob in
can result in a
broken locking
mechanism.