User`s guide

Chapter 1: Introduction
Master Editor
1 Introduction
Master Editor
To access the Master Editor from a model 8361, 8461, or UC-ST, press the SETUP key.
The Choose Setup Mode message will appear. Touch the MASTER EDITOR key.
Master Editor Main Menu
The Master Editor will time out
after 20 minutes of inactivity if idle
in the Master Editor Mode. While
one scale is in the Master Editor,
other scales or a host cannot
communicate with the master.
If another scale is currently accessing the Master Editor, the message MASTER EDITOR
CURRENTLY UNAVAILABLE will be displayed and you will need to try again at a later
time. If you are not communicating with the master (you are off-line), an ERROR
COMMUNICATING WITH THE MASTER message will be displayed, and you will need to
re-establish communication before continuing.
Otherwise, the numeric keyboard will be displayed prompting for a password. If no
password has been programmed, just touch ENTER. When the Master Editor menu
opens, the current access level, department number, software version, and the Master's
1-1