User`s guide

Chapter 11: Rackmount Ethernet Master
General Description
11 Rackmount Ethernet Master
General Description
The METTLER TOLEDO® REM (Rackmount Ethernet Master) is designed for connection
to a network of METTLER TOLEDO TNET Satellite or Ethernet Client scales and controllers
through a wired RS485 high-speed network, a wired Ethernet network, or a wireless
Ethernet network. The REM will support both TNET and Ethernet scales. Each REM can
support up to 24 TNET satellites and 25 Ethernet Clients. The REM acts as the server on
the network providing the satellites and clients with PLU file information. Any
SmartTouch
®
satellite or Ethernet Client (Model 8361, 8461, or UC-ST) on the network
can access the REM master editor for setup and programming.
The Rackmount Ethernet Master
will be referred to as either
Ethernet Master or REM.
Models that can be connected to the REM include: Model 355, 2450, 8361, 8450,
8461, and UC-ST.
Programming functions in the REM are identical to the SmartTouch
®
Master and STEM
(SmartTouch Ethernet Master).
ISO9001
This product was developed,
produced and tested in a
Mettler Toledo facility that
has been audited and
registered according to
international (ISO 9001)
quality standards.
The REM comes in three models:
• REM0-5220 - for mounting underneath a UC-ST unit.
• REM0-5210- for rack mounting.
• REM0-5200 - for rack mounting only (pre-2007)
REM0-5220 (Front View)
REM0-5210 (Front View)
REM0-5200 (Front View)
11-1