User`s guide

Chapter 8: Graphics
Printing Graphics on the Model 8360 or 8361
8 Graphics
Printing Graphics on
the Model 8360 or
8361
The following section describes the graphics printing capability of the Model 8360 or
8361 with the Model 317 Standard Printer and DayGlo Printer.
Label Printer 1
* When formatting Graphics into a label you can accomplish this by creating a custom
label format or by choosing a default format that contains the graphics setup.
Up to 4 Graphics can be printed on Printer 1 Label printer, 1 of each of the above.
There are only 2 graphic files, The Master Graphic File (stored in the master and may be
added to and modified) and the Satellite Graphic file (which contains 15 graphics and
the Safe Handling Panel and cannot be added to or modified)
If label 1 and label 2 both contain a Satellite Graphic the same graphic will print on
both, only one Satellite Graphic can be specified in PLU Record.
Should the Store Logo Graphic ever be changed, the Model 8361 will automatically
send the Logo to the printer. You can send Resident Graphics each time you change it if
you wish.
Master Store Logo Graphic
1. *Format into Label.
2. Assign in Unit Setup under
Calibrate/Install,Plu Settings,
Store Logo.
3. Send Resident Graphics to Printer
One. (Optional)
Store
Logo
Master Linked Graphic
Linked
Graphic
Satellite
Graphic
Safe Handling
Panel
Satellite Graphic
1. *Format into Label
2. Specify in PLU record under
Sat No.
3. Send Satellite Graphic to
Printer One (Optional)
1. *Format into Label.
2. Specify in PLU record
under Graphic No.
Description Line 1
Description line 2
Part of Satellite Graphics
1. *Format into Label
2. Send Resident Graphics to Printer
One. (Optional)
8-1