User`s guide

SmartTouch Master User's Guide
Selection
Description
Tracking Enabled YES Allows reports to be pulled from the master that use the tracking
number associated with COOL in the PLU record. NO is standard
reporting (default setting).
DHCP Server This is the current IP address of the local network’s DHCP server. This
field will only be displayed when the “Network” is set to “Automatic” and
cannot be changed.
DNS Server This is the current IP address of the local network’s DNS server. This
field only displays when the “Network” is set to “Automatic” and cannot
be changed.
Manual TFTP IP
Address
This is the current TFTP (Trivial File Transfer Protocol) IP Address.
Manual TFTP Port The default port is 69. This setting can be changed by the system
administrator if needed.
Manual Boot File
Name
This is the file name of the application or configuration file that will be
downloaded to the scales.
DST 2007 Enabled Y = Use 2007 US DST Rules
N = Use Pre-2007 DST Rules
7-10