User`s guide

SmartTouch Master User's Guide
Network settings
from here down
display only when
“Network” is set to
“Automatic”.
Setup Master Screens 1, 2 and 3
The selections on the setup screens are explained below.
Selection
Description
Weighing Units This must match the weighing mode of the Clients and Satellites, either lb
or kg.
Weight Increment This must match the weighing mode of the Clients and Satellites.
Normally 0.010 lb or 0.005 kg.
Currency Increment The smallest division of the local currency.
Currency Symbol When selected, the Alphanumeric keyboard will display. The symbol can
be any character on the keyboard.
Date Format Select from four different formats. MM/DD/YY, DD/MM/YY, YY/MM/DD,
YY/MON/DD. Default is MM/DD/YY.
Date Separator Select the slash “/”, dash “-“, or period “.” for a date separator.
Time Format Select either 12-hour or 24-hour time.
Barcode Style Select UPC or EAN barcodes.
Obsolete PLU’s
Enabled
Enable or Disable obsolete PLUs. Obsolete accumulators are
accumulators that are saved when weekly data for PLU’s are updated.
Network You must first select the network boot type, Manual or Automatic.
Automatic is the default. Automatic will use DHCP to automatically obtain
the network boot information from a DHCP server. The parameter details
are explained below.
When Automatic is selected, the DHCP feature will be used. The “Server
IP”, “Server MAC”, “Subnet Mask”, “Router”, “DHCP Server”, and “DNS
Server” fields will display but cannot be changed. Changes will be
allowed in the “Server Host Port” and “Server Name” fields.
If Manual is selected, then the DHCP feature is disabled and the TCP/IP
parameters must be entered manually. The “Server MAC” field will display
but no changes are allowed. The “DHCP Server” and “DNS Server” fields
will not display and changes are not allowed to these fields. Changes will
be allowed in the “Server IP”, “Server Host Port”, “Server Name”, “Subnet
Mask”, and “Router” fields.
7-8