User`s guide

Chapter 5: Master Editor, Reports Menu

Production Items Report

The Production Items reports can be viewed on the screen or printed on an external

printer. These reports will print the total weight, value, count, and number of runs for the

items in a Group, Department, or Store for the selected accumulator within the defined

value and weight limits in ascending order by weight.

To print Production Items reports, touch REPORT followed by PRODUCTION ITEMS to

display the Production Items Report Selection Screen.

Select the various options, then touch CANCEL to return to the Master Editor Menu,

PRINT to print the report, or DISPLAY to view the report on the screen. From the

displayed screen, touch PAGE UP or PAGE DOWN to view different pages of the report

(when available), RETURN to return to the Master Editor Menu, or PRINT to print the

report. A sample (displayed) report is shown following.

Production Items Report Selection Screen

Select Group Type

Touch STORE to retrieve all the records from a store, DEPT to specify a department, or

GROUP to specify a group. Only the records within the selected group and accumulator

with values and weight within the limits will display.

Select Accumulators

Touch one of the accumulator names to choose which accumulators' records will be

displayed. Only the records within the selected group and accumulator with values and

weight within the limits will display.

Select Limits

Specify the Value and/or Weight limits by touching the appropriate key and entering the

value through the numeric keyboard. Both sets of limits will be applied to the data. The

scale will not allow you to enter a maximum value lower than the current minimum or a

minimum value higher than the current maximum. Only the records within the selected

group and accumulator with values and weight within the limits will display.

5-5