User`s guide

SmartTouch Master User's Guide
Nutrition Fact Fields
The master will prompt you for all of the *fields (required and voluntary) in a Nutrition
Fact record. In all cases, it is the responsibility of the operator to enter the correct values,
paying special attention to units and increments. The scale will simply print the
information that is entered with the unit symbol for the units that were requested without
doing a "validity check" of any type.
*Note: The Serving Size and
Servings per Container fields
are the exception. For the
Serving Size units, a screen
will be presented to choose
OZ, PIECES, TEXT, or
CANCEL.
When entering data through the numeric keyboard, touching BLANK for a required field
will set the value to zero, while touching BLANK for a voluntary field will leave the field
blank and it will not be printed. In general, the fields followed by a "%" sign refer to the
Percent Daily Value for that field based on a 2000 calorie diet. This calculation is
not
checked within the scale.
If at any time you want to exit the editing screens, touch CLEAR (or CANCEL from the
alphanumeric keyboard) until the SAVE CHANGES prompt appears. At this point, touch
YES to save the record (unmodified fields will stay at their default values), or touch NO
or CANCEL to exit without saving the record.
If all of the fields have been modified (or blanked), the SAVE CHANGES prompt
automatically appears. Touch YES to save or touch NO or CANCEL to disregard all of the
data entered. Touching CANCEL displays the SAVE CHANGES prompt. Touch YES to
save or touch NO to disregard any data entered. Either situation will return to the
Nutrition Facts Number numeric keyboard.
Touching OZ or PIECES presents a numeric keyboard for the entry of the number of
ounces/pieces, followed by a numeric keyboard to enter the serving size in grams.
(FDA rules specify the conversion 1 oz. = 28 grams. The scale does not check this
calculation.) The scale then automatically calculates the Servings per Container.
Touching TEXT prompts you to enter the serving size (limit is 28 characters or less
depending on the template used) followed by the number of servings per container
(limit 10 characters).
Edit Nutrition Facts
To edit an existing Nutrition Facts Record, enter an existing Nutrition Facts number through
the numeric keyboard or choose from the list. The Nutrition Facts Edit Screen will
display.
After editing the record, touching QUIT displays a SAVE CHANGES prompt. Touch YES to
save changes and exit, NO to exit without saving changes, or CANCEL to return to the
Nutrition Facts Edit screen.
Touching DELETE displays a confirmation screen. Touch YES to delete the record and
exit, or NO to return to the edit screen. The DELETE key is only available when editing
existing NF records.
Touching UP or DOWN (when available), moves up or down one page. There are a
total of three pages in the Nutrition Facts Edit screen.
To edit a field, touch that field and follow the editing instructions.
Nutrition Facts Edit Screen
(first screen shown)
2-18