Reference Manual

Draft
Installation and Putting into Operation14 Q3 Dosing Module
4.3 Setting up the liquid dosing configuration
4.3.1 Overview
1
2
3
4
5
6
7
8
9
10
11
1
Dosing lift
7
ErgoClip adapter holder
2
Dosing module
8
QLL kit for bottles (available separately)
3
Liquid dosing head
9
QL3 pump (available separately)
4
Sealing insert
10
Air tube (included in QLL kit for bottles)
5
Top panel
11
Liquid tube (included in QLL kit for bottles)
6
Vial adapter
4.3.2 Interface of the pump
Rear
Front
11
22
3
3
4
4
5
5
6
6
1
Air outlets to bottle
4
Socket for AC/DC adapter
2
Pressure release button and indicator light
5
USB port
3
Air exhaust outlet
6
Air inlet
4.3.3 Wiring the pump
The instrument is supplied with an AC/DC adapter and a country-specific power cable. The AC/DC adapter is
suitable for use with:
100 – 240 VAC, 50/60Hz.
1 Install the cables in such a way that they cannot be damaged or interfere with operation.
2 Insert the plug of the AC/DC adapter in the power inlet of the pump.
3 Secure the plug by firmly tightening the knurled nut.