Reference Manual

Draft
Design and Function10 Q3 Dosing Module
3.3 Components description
Dosing module
The dosing module is designed to hold the dosing
head and can automatically move up and down
during the dosing procedure.
Dosing lift
The dosing lift is fixed to the back of the weighing
chamber. It contains the mechanism that moved the
dosing module up and down during the dosing
procedure and is controlled through the terminal.
Top panel
The Q3 dosing module includes a top panel
especially designed to minimize the influence of the
environment on the dosing process. An opening in the
top panel allows the tip of the dosing head to
penetrate the weighing chamber while dosing. The top
panel is attached to the bottom part of the dosing
module, moving up and down together with it.
While the dosing module is at its uppermost position,
other weighing methods and accessories can be used
normally.
Dosing head holder
The dosing head holder consists of four pins that hold
the dosing head in place. Once installed, the dosing
head is secured and can only be released by pressing
the release buttons on either side of the holder. This
holder includes an RFID reader to easily identify the
attached dosing head.