Specifications

8•2
Rev. 10/04
InkMate
®
DESCRIPTION
InkMate is a benefit denial tag containing two vials of permanent ink that
will r
ender soft goods unusable if someone attempts to remove the tag by
for
ce. InkMate is identical to the top por
tion of an InkT
ag 3, but does not
include the bottom clutch mechanism. Instead, it is designed to be mated
to a SuperT
ag, or Ultra*Gator hard tag. The combination creates both
Benefit Denial and EAS pr
otection. A war
ning is written on the top sur
face
of the tag. InkMate contains yellow and blue ink. Use the SuperTag or
Ultra*Gator detachers to remove InkMate. Hard tags are sold separately.
DIMENSIONS
Diameter: 41.28 mm (1.625 in.)
Depth: 9.4 mm (0.37 in.)
Weight: 19 g. (0.67 oz.)
PRODUCT CODES
*
ST13866 InkMate D1 (long Pin)
ST14060 InkMate S1 (Medium Pin)
*not available in Eur
ope
Ultra•Ink
TM
DESCRIPTION
Ultra•Ink
TM
is a combination of an Ultra•Max anti-shoplifting EAS tag and a Benefit
Denial ink tag. Ultra•Ink is an economical, ultra lightweight tag. Its small, yet highly
visible design and stronger defeat-resistant clutch offer an attractive solution for
soft goods protection. Ultra•Ink incorporates Sensormatic’s patented breaker
plate and dispersion pad to dispense ink and remove the shoplifting motive by
rendering stolen merchandise useless or unsellable if the tag is removed through
unauthorized force. Ultra•Ink
TM
contains an unfreezable, non-toxic, aggressive
permanent ink that will permanently damage a garment, thereby denying the
benefit of shoplifting. Ultra•Ink
TM
also contains an embedded SuperTag
®
II bias
resonator to provide the highest anti-theft tag detection rate, even through
booster bags or metal carts. It is fully compatible with all Ultra•Max systems.
DIMENSIONS
L x W x H: 48.0 mm x 40.0 mm x 16.4 mm (1.89” x 1.57” x 0.65”)
Weight: 0.70 oz.
PRODUCT CODES
ZL110BY-WL Ultra•Ink With Lock Blue/Yellow (English Warning Label)
ZL110BY-W Ultra•Ink Without Lock Blue/Yellow (English Warning Label)
InkTag
®
3
DESCRIPTION
InkTag 3 is a benefit denial tag containing two vials of permanent ink that will
render soft goods unusable if someone attempts to remove the tag by force.
InkTag 3 is made up of two separate parts: The top is flat and saucer-shaped
and contains the ink vials; the bottom is a cone shaped "clutch" that holds the
tag to the merchandise. A warning is written on the top surface of the tag.
InkTag 3 contains yellow and blue ink. Use the AMD-1000 detacher to
remove InkTag 3.
DIMENSIONS
Diameter: 41.28 mm (1.625 in.)
Depth: 9.4 mm (0.37 in.)
Weight: 19 g. (0.67 oz.)
PRODUCT CODES
*
STIT3 InkTag 3 (includes clutch)
ST14085 InkTag 3 Clutch
*not available in Europe