Specifications

7•10
Rev. 10/04
ScanMax
®
IS Pro
DESCRIPTION
The Sensormatic ScanMax IS Pro is an EAS label deactivator
integrated into a PSC Magellan 9500 bi-planner Scanner. The unit
provides an integrated scanner and deactivator solution that’s
easy to use and can help speed up the checkout process.
The ScanMax IS Pro will deactivate Ultra•Max labels up to 12.5
cm (5 in.) above the unit at a throughput rate of up to 200 cm/sec.
(80 in./sec.).
The deactivator antenna operates off the ScanMax Pro Controller.
The antenna can be installed downstream on either side of the scanner
window to accommodate product from the right or the left.
FEATURES
• One motion scanning and deactivation
• W
eigh scale compatibility
• Ability to control deactivation based on a valid barcode scan
• Audible and visual indication of deactivation
• Easy to install
MECHANICAL/FUNCTIONAL
Antenna Dimensions:
• (LxWxD) 238 x 85 x 91 mm (9.37 x 3.35 x 3.58 in.)
• Weight: 3.5 kg (7.65 lbs.)
Controller Dimensions:
• (HxWxD) 10.1 x 26.2 x 22 cm (4 x 10.3 x 8.7 in.)
• Weight: 2.5 kg (5.5 lbs.)
ELECTRICAL POWER
• Voltage: 100-120 / 200-240 Vac, 1A 50 - 60 hz
• Typical: 10W @ 120V, 15W at 240V
• Max: 50W @ 120V and 240V
• Operating Frequency: 58 kHz (+200 Hz)
• Operating Temperature: 0º to 40ºC (32º - 104ºF)
CONTROLLER SAFETY
• 47 CFR, Part 15
• ENS 300 330
• ENS 301489
• ENS61000-3-2
• ENS61000-3-3
Product Codes
*
• ZBSMPIS ScanMax IS Pro antenna with extension cable and
interface cable to scanner
• ZBSMP-MS ScanMax IS Pro System for the Magellan 9500
scanner. Includes antenna and ScanMax Pro Controller
• ZEAMB9020: Scan Max Pro Dual Antenna Controller (U.S.)
• ZESMPRO ScanMax Pro Controller with cord
• ZPSTP-RA Remote Alarm Module
*Available in the U.S. and Canada only
Deactivator antenna