Specifications

7•6
Rev. 10/04
ScanMax
®
IP Pro
DESCRIPTION
The ScanMax IP Pro is an Ultra•Max distance deactivator that
installs flush against the Point Of Sale (POS) bar code scanner for
seamless scan-deactivation of Ultra•Strip
®
anti-shoplifting labels.
The deactivator is only 9.2 cm (3.6 in.) wide and can be installed
next to any 51 cm (20 in.) long bar code scanner (flatbed or bi-
planar). An optional stainless steel trim ring can be installed
around both devices to complete a one-unit appearance. Since no
physical or operational connection is made between the scanner
and the deactivator, service, warranty and other issues for each
device are not affected. The IP Pro is not magnetic media safe.
FEATURES
• Flush mounting next to scanner allows seamless "scan-
deactivation" of EAS labels
• Small, nar
r
ow footprint saves space at the Point-Of-Sale
• Deactivation of Ultra•Strip
®
labels up to 15 cm (6 in.) above
the pad effective for source-tagged merchandise
• High thr
oughput rate of 60-80 in./sec. (150-200 cm/sec.) keeps
checkout lines moving
• Easy to use with minimal training
•
Visual confirmation of deactivation via optional remote
alarm module
• Not magnetic media safe
MECHANICAL/FUNCTIONAL
ScanMax IP Pro antenna
• (LxWxD) 51 x 9.2 x 12.7 cm (20 x 3.6 x 5 in.)
• W
eight: 7.25 kg (16 lbs.)
ScanMax Pro Controller:
• (LxWxD) 10.1 x 26.2 x 22 cm (4 x 10.3 x 8.7 in.)
• Weight: 2.5 kg (5.5 lbs.)
ELECTRICAL POWER
• Primary Input: 100 - 250 VAC, 50/60 Hz
• Rated Current: 2.0 A operating, 0.2 A standby
• AC Operating Phase: 0º, 120º, 180º, 240º
• Antenna Output: 1.6 ms burst
• Transmitter Current: 0.5 Apk (nominal)
• Operating Frequency: 58 kHz
ScanMax IP Pro and the controller comply with all applicable
International regulations for safety and emissions.
OPTIONAL REMOTE ALARM MODULE
The Remote Alarm Module provides audible and visual indication
of deactivation. The unit contains a key switch for turning the
deactivator antenna on/off.
ALARM MODULE DIMENSIONS
Alarm Module Height: 6 cm (2.4 in.)
Alarm Module Width: 8 cm (3.25 in.)
Alarm Module Depth: 3.2 cm (1.3 in.)
Product Codes
*
• ZBSTPP2: ScanMax IP Pr
o antenna
• ZESMPRO: ScanMax Pro Controller
• ZEAMB9020: Scan Max Pro Dual Antenna Controller (U.S.)
• ZPSTP-RA: Remote Alarm Module
*not available in Europe