Specifications

6•7
Rev. 10/04
DESCRIPTION
The Ultra·Strip® III Individual Label is designed for permanent
placement either inside a cavity within a product or within a custom-
designed reusable device. The adhesive-free quality of this label
allows it to be inserted into the cavity without adhesive interference.
Due to this label's usage, contact deactivation is not recommended.
NOTE: Ultra·Strip III Individual labels inserted into products must be
secured well enough to remain inside the product for the life of the
product.
DIMENSIONS
(LxWxD): 45.21mm ± 0.5mm x 10.67mm ± 0.5mm x Maximum
1.89mm (1.78” ± 0.020” x 0.420” ±0.020” x 0.074”)
Ultra·Strip
®
III Individual Label
PRODUCT CODES
Roll Format Product Code Mode of Application Roll Qty. / Case Qty. Case Weight
White ZLDRSING1 Hand 5000 2.76kg (6.07 lbs.)
DESCRIPTION
The Ultra·Strip
®
II Reduced Cavity Height Label was designed to
provide concealed, source tagged protection for wine and spirits. It
is intended to be applied to bottles then covered by the
manufacturer's paper or plastic primary information label at the point
of manufacture, or at distribution centers. The label's thinner profile
minimizes its visual impact on the product. Due to this label's
extr
eme pliability, it must be applied only to rigid surfaces, and is
available in source tagging rolls for automatic, high-speed
application.
DIMENSIONS
(LxWxD): 44.6mm ± 0.15mm x 10.16mm ± 0.15mm x Maximum
1.12mm (1.76” ± .006” x 0.40” ± 0.006” x 0.044”)
Ultra·Strip
®
II Reduced Cavity Height
PRODUCT CODES
Roll Format
Product Code
Mode of Application Roll Qty. / Case Qty. Case Weight
White
ZLNRLE12K1
Automatic
48,000
22.7kg (50 lbs.)