Specifications

6•5
Rev. 10/04
DESCRIPTION
The Ultra•Strip III Low Profile Inactive label is designed for placement
inside a CD case where height restrictions are a limiting factor. The
source-tagging label must be placed on a rigid substrate due to its
reduced cavity height. The label is inactive at the time of application,
then activated on products designated for Ultra•Max equipped stores.
The label provides the highest detection and deactivation
performance when properly activated with an approved device.
Available for automatic application only.
DIMENSIONS
(LxWxD) 44.6 x 10.16 x 1.2 mm (1.76 x 0.4 x 0.047 in.)
Ultra•Strip
®
III Low Profile Inactive
PRODUCT CODES
Roll Format Product Code Mode of Application Roll Qty. / Case Qty. Case Weight
White ZLINACTLT9K1 Automatic 9,000 / 36,000 18.23 kg (40.2 lbs.)
DESCRIPTION
The Ultra•Strip III Insertable label is released to the European market
only. It is designed to be manually inserted into compact disks,
perfumery products, and other plastic-wrapped boxes. When used to
pr
otect CDs, the label is inser
ted into CD jewel cases thr
ough the narrow
slot on the side of the jewel box. The label exhibits the same high
detection and deactivation characteristics as all Ultra•Strip III labels.
NOTE: The Inser
table label should not be inser
ted into materials
appealing to children.
DIMENSIONS
(LxWxD): 50 x 9.25 x 2.1 mm (1.97 x 0.36 x 0.082 in.)
Ultra•Strip
®
III Insertable
PRODUCT CODES
Individual Format Product Code Mode of Application Case QTY Case Weight
Barcode ZLDRCI5K2 Hand 5,000 3.56 kg (7.85 lbs.)