Operating instructions

Further important information regarding your PG-S balance

6.3 Changing the protective cover

If you operate your balance in an environment liable to cause contamination, we

recommend you cover it with the supplied transparent protective cover for the

keypad and display.

Contaminated protective covers of all balance models can be changed, see

Optional equipment in Section 7.3.

Cleaning beneath the weighing pan

- Remove the weighing pan, the weighing pan support and the draft shield

element.

- Remove the knurled screws and the fastening plate, as well as the protective

cover (if used).

- You can now clean the dirty parts under running water.

6.4 RS232C interface

Ready to send

Ready to receive

Each PG-S balance is equipped with an RS232C interface as standard for the

attachment of a peripheral device (e.g. printer or computer).

- 9-pin socket

- Matching to the other device (transfer parameters) is possible via the menu

settings (see Sections 4.16-4.21)

The versatile features of the PG-S balances regarding documentation of the

results can not be utilized to the full until a printer, e.g. the LC-P45 from METTLER

TOLEDO is attached. The printed results make a decisive contribution to a simple

working procedure following GLP/GMP.

Notes

If you wish to attach several peripheral devices at the same time, it is simple to

retrofit your PG-S balance with the LocalCAN universal interface (see Section

6.5).

You will find a detailed description of the available interface commands in the

enclosed brochure "Reference manual MT-SICS".