Operating instructions

Special applications and functions
49
5.8 Test of the balance with internal weight or external weights
You can always test the accuracy of your balance. This test is performed either with the built-in weight or with external
weights, depending on your setting in the menu (see Section 4.4).
Test of the balance with the internal weight
Make sure that the "Test of the balance with the internal weight" (test int) is
selected in the menu (see Section 4.4).
Ensure that the weighing pan is unloaded and close the doors of the draft shield
(if used). There is no need to tare the balance before the test.
1/10 d
Cal
long
tE5t
fcSfc
o
1
ao
.nt \
\
\
\
n n n \
uuu \
\
\
\
donE \
\
\
Initiate the test procedure by pressing and holding the «Cal» key. The balance
briefly confirms that the test is being performed with the internal weight.
The following displays appear during the test:
The balance determines the zero point.
The balance is processing the results of the test.
The balance confirms that the test has been performed.
Over a period of 10 seconds, the balance now shows the difference (deviation)
between the adjustment (calibration) and the current test weighing.
On completion of the test, the balance automatically returns to the weighing
mode.