Operating instructions

Special applications and functions
44
o
n
The set weighing time (time interval) remains stored until it is changed or the
power supply of the balance is interrupted.
By briefly pressing the «!£3» key
;
you can switch between the normal weighing
mode and dynamic weighing at any time.
By pressing and holding the «F» key when in the dynamic weighing mode, you
can recall the preselected time interval to the display and change it.
5.5 Below-the-balance weighings
Your balance is fitted with a hanger for below-the-balance weighings.
For PG-S balances
Loosen cover on the underside of the balance and turn as far as it will go.
You can now see the hook of the below-the-balance weighing device.
Using this hook, you can perform weighings up to full load.