Operating instructions

Contents
4
Contents
1 Getting to know your PG-S balance 6
1.1 Introduction 6
1.2 Overview of the PG-S balances 6
1.3 What you should know about these instructions 7
1.4 Safety has priority 8
2 Putting the balance into operation 9
2.1 Unpacking and checking the standard equipment 9
2.2 Location selection or location change 10
2.3 Leveling the balance 10
2.4 Power supply 11
2.5 Adjusting (calibrating) the balance 12
3 Weighing made simple 13
3.1 Switching the balance on and off 13
3.2 Taring the balance 14
3.3 Performing a simple weighing 15
3.4 Weighing with the analog display- DeltaTrac 15
3.5 DeltaRange® balances with movable fine range 16
3.6 Faster weighing with lower readability 16
3.7 Switching weighing units 17
3.8 Printing out the weighing result and transferring data 17
4 The menu 18
4.1 What is the menu? 18
4.2 Menu operation 19
4.3 Reset 21
4.4 Selection of the adjustment (calibration) and test function 21
4.5 Switching automatic adjustment call-up on or off 22
4.6 Preselecting a function 23
4.7 Setting the vibration adapter 24
4.8 Setting the weighing process adapter 24
4.9 Selecting repeatability 25
4.10 Selecting weighing unit 1 26
4.11 Selecting weighing unit 2 27
4.12 Switching automatic zero correction (Autozero) on or off 28